Tool category

Electronics Manufacturing Tools

Private browser tools for measured reflow profiles, Excellon drill and Gerber alignment, PCB array and master-panel optimization, solder-paste Gerber and stencil-ratio screening, PCBA BOM/CPL reconciliation, placement normalization, and manufacturing handoff. Free to use; no account required.

Available tools

Electronics Manufacturing

Reflow Profile Analyzer

Map measured thermocouple CSV logs locally, inspect ramp, soak, time above liquidus and peak, compare editable process limits, and export annotated charts and PDF/CSV reports.

→

Electronics Manufacturing

Excellon ↔ Gerber Drill Auditor

Check Excellon drill files against Gerber outline and copper locally; detect origin, unit and format mismatches, annular rings, edge clearance, slots, stacked holes, tools, and aspect ratio.

→

Electronics Manufacturing

Gerber Stencil Area-Ratio Auditor

Inspect RS-274X solder-paste flashes locally; calculate aperture area, perimeter, area and aspect ratios, classify configurable thresholds, rank weak apertures, and map them by board position.

→

Electronics Manufacturing

OPC UA NodeSet Auditor

Audit NodeSet2 namespace indexes, models, dependencies, aliases, nodes, references, missing targets, collisions, and semantic differences locally.

→

Electronics Manufacturing

PROFINET GSDML Inspector

Inspect GSDML XML locally; trace DAP, module and submodule relationships, slot/subslot rules, cyclic I/O sizes and parameter records, then audit an explicit configuration map.

→

Electronics Manufacturing

EtherCAT ESI / SII Inspector

Inspect EtherCAT ESI XML and optional SII EEPROM images locally; audit identity, SyncManagers, RxPDO/TxPDO entries, bit offsets, overlaps, references, and cross-format consistency.

→